Archive | Uncategorized RSS feed for this section

The team installed the safety wire. Foot pedal rigging was completed along with new cotter pins. Jonathan installs safety wire Foot pedal rigging Elijah constructs his work tag Foot pedal rigging Carter and Elijah trial fitting the tail

The team worked on master cylinder repairs and the backlash of the gears was measured.

The engine receives a beautiful coat of gold paint. Rivets are placed in the nose cone.

In order to prepare the engine, the connecting rods needed to be protected. The bolts were cleaned and, after being instructed, Carter applied the sealant, and the bolts were applied to hold the crankcase together. There was a demonstration regarding how to inspect an oil filter and also an explanation how to correctly install the […]

The program gained a new participant, Titus, who was assisted by Zadoc to craft his name tag. Jonathon and Carter researched a bolt that was needed. The rudder pedal was linked to the steering yoke. Time was taken to explain the function of a solenoid.

The work continues as the Cessna begins to take shape. +The cowling was attached after Carter finished the last bracket. +Mentors Jay and Bill took the brake pads’ lining off. In cramped quarters Tony, Jonathon and Josiah continue to work on the brakes.+The crankcase will soon be put together. Jonathon and Josiah practiced using silk […]

Progress continues to be made on the brakes and tires along with the seals for the cowling.

Our group used our time for a demonstration of putting together a portion of the engine. The engine mount was repaired and ready to be reinstalled.

It was discovered that the engine mount had a small dent; therefore, it had to be removed. The voltage regulator and brake hoses were installed. The dimensions of a bolt needed for the wheels was determined using the parts catalog. The safety wire was simulated by one of our mentors.

The brake hardware was removed from the donor Cessna 150L in preparation for mounting the brakes. The snap ring tool was used to put the steering collar on the nose gear. Participants learned how to use the saw while cutting steel tubing. The following week work continued on the brakes which included cleaning the brake […]